Monitor AMI Oxysafe AC


Dissolved oxygen measurementwith Swansensor Oxysafe 1000 including Pt1000 temperature sensor
Measuring range0.01 to 20 ppm
Resolution0.01 ppm
Saturation (Resolution)0 to 200% (0.1%)
Accuracy0.3% (if cal. temp. = measuring temp.)
respectively: 1.5% at +-10° deviation to cal. temp.
Response timet90 < 180 sec. (rising concentration)
Temperature measurement(Pt1000)
Measuring range-30 to 130°C
Resolution0.1° C
Power Supply
Voltage100-240 VAC (±10%), 50/60Hz or 10-36 VDC
Sample conditions
Flow rate4 to 15 l/h
Temperatureup to 50° C
Inlet pressureup to 1 bar
Outlet pressurepressure free
pH not lower than 4,
suspended solids less than 10ppm
Panel280 x 850 x 150 mm

For further information see datasheet.