Chlorine, Ozone, Chlorine dioxide

Two different technologies are available for monitoring free chlorine, ozone, chlorine dioxide or monochloramine. The choice of the technology depends on water quality and treatment methods:

  • Amperometric three electrode system TRIDES: Seawater  or common city water. Treatment with free chlorine, chlorine dioxide or ozone. pH below 8.5. No anticorrosion additives. Amperometric systems have lower cost of ownership (no reagents). Under unknown conditions, however, it is safer to use a photometer.
  • Process photometers CODES: Work under the same conditions as the amperometric system. In addition they can be used also for monochloramine and total residual chlorine. No limit for pH levels. They also work well in the presence of anticorrosion additives. Biofouling can be powerfully reduced with the optional Cleaning Module.

A high precision portable photometer is needed for calibration in any case: CHEMATEST portable photometer

Chematest 42

Portable universal measuring device instrument for photometric determinations analysis, sensor-based measurements and 90 ° IR turbidity measurement.

Details >

IXA70065042_Chematest42_ohneReagenzien

Monitor AMI Trides

Amperometric analyzer for disinfectans such as hypochlorous acid, free chlorine, chlorine dioxide, ozone, bromine, iodine.

Details >

IXA261110XX_AMI_Trides

Monitor AMI Trides compact version AC

Amperometric analyzer for disinfectans such as hypochlorous acid, free chlorine, chlorine dioxide, ozone, bromine, iodine. Compact version mounted on panel 300 x 530 x 200 mm

Details >

IXA26111100_AMI_Trides_comp_Low.jpg

Analyzer AMI Codes-II AC

Colorimetric process analyzer (DPD-method) for measurement and dosing control of disinfectants such as free chlorine, hypochlorous acid, chlorine dioxide, ozone, bromine, iodine and monochloramine.

Details >

IXA2544X1000 AMI_Codes-II

Analyzer AMI Codes-II TC AC

Colorimetric process analyzer (DPD-method) for measurement of total chlorine and calculation of dichloramine.

Extended measurement range up to 10 ppm.

Details >

IXA2544X6000 AMI Codes-II_TC.jpg

Analyzer AMI Codes-II CC AC

Colorimetric process analyzer (DPD-method) for measurement of free chlorine, monochloramine, combined chlorine and total chlorine.

Details >

IXA2544X7000 AMI_Codes-II_CC

Chematest 30

The flexible and robust solution for the determination of disinfectants, pH value and cyanuric acid.

Details >

IXA70065030 Chematest 30_ohneReagenzien.png

Chematest 35

Portable universal measuring instrument for photometric determinations and sensor-based measurements supplied in a carrying case with accessories.

Details >

Chematest35_inkl.Koffer.jpg