Monitor AMI Deltacon Power; Pre-rinse


Transmitter AMI Deltacon Power with two conductivity sensors UP-Con1000-SL and flow cell Catcon-Plus-SL mounted on a stainless steel panel, ready for installation and operation.

Transmitter with two signal outputs for measured values or continuous control, two relays as limit switches or as controllers, alarm relay as summary alarm indication, input for potential free contact.

The flow cell is equipped with a manual flow adjustment valve, a digital sample flow meter and an integrated cation exchanger vessel with automatic deaeration.

Pre-rinse setup with second resin vessel as option.

  • Measuring range:
    - 0.055 to 1000 μS/cm,
    - pH 7.5 to 11.5,
    - ammonia 0.01 to 10 ppm
  • Sample conditions:
    - Temperature: up to 50 °C
    - Inlet pressure: up to 2 bar
    - Outlet pressure: pressure-free (atmospheric drain)
  • Sample connections:
    - Inlet: Swagelok ¼” tube adapter
    - Outlet: G ½” adapter for flexible tube 20 x 15 mm
  • Power Supply
    -100-240 VAC (±10%)
    -10-36 VDC

Please note that the cation exchange resin is not included in the delivery as it's shelf is limited. Please order cation exchange resin separately.

For further information see data sheet.